Siemens SCALANCE W1750D UI

Intrusion Detection
27.4 Configuring IDS
SCALANCE W1750D UI
448 Configuration Manual, 02/2018, C79000-G8976-C451-02
27.4
Configuring IDS
The IDS policy for APs can be created using the CLI.
To configure IDS using CLI:
(scalance)(config)# ids
(scalance)(IDS)# infrastructure-detection-level <type>
(scalance)(IDS)# client-detection-level <type>
(scalance)(IDS)# infrastructure-protection-level <type>
(scalance)(IDS)# client-protection-level <type>
(scalance)(IDS)# wireless-containment <type>
(scalance)(IDS)# wired-containment
(scalance)(IDS)# wired-containment-ap-adj-mac
(scalance)(IDS)# wired-containment-susp-l3-rogue
(scalance)(IDS)# detect-ap-spoofing
(scalance)(IDS)# detect-windows-bridge
(scalance)(IDS)# signature-deauth-broadcast
(scalance)(IDS)# signature-deassociation-broadcast
(scalance)(IDS)# detect-adhoc-using-valid-ssid
(scalance)(IDS)# detect-malformed-large-duration
(scalance)(IDS)# detect-ap-impersonation
(scalance)(IDS)# detect-adhoc-network
(scalance)(IDS)# detect-valid-ssid-misuse
(scalance)(IDS)# detect-wireless-bridge
(scalance)(IDS)# detect-ht-40mhz-intolerance
(scalance)(IDS)# detect-ht-greenfield
(scalance)(IDS)# detect-ap-flood
(scalance)(IDS)# detect-client-flood
(scalance)(IDS)# detect-bad-wep
(scalance)(IDS)# detect-cts-rate-anomaly
(scalance)(IDS)# detect-rts-rate-anomaly
(scalance)(IDS)# detect-invalid-addresscombination
(scalance)(IDS)# detect-malformed-htie
(scalance)(IDS)# detect-malformed-assoc-req
(scalance)(IDS)# detect-malformed-frame-auth
(scalance)(IDS)# detect-overflow-ie
(scalance)(IDS)# detect-overflow-eapol-key