Siemens SCALANCE W1750D UI User Manual

Hotspot Profiles
33.2 Configuring Hotspot Profiles
SCALANCE W1750D UI
500 Configuration Manual, 02/2018, C79000-G8976-C451-02
33.2
Configuring Hotspot Profiles
To configure a hotspot profile, perform the following steps:
1. Create the required ANQP and H2QP advertisement profiles.
2. Create a hotspot profile.
3. Associate the required ANQP and H2QP advertisement profiles created in step 1 to the
hotspot profile created in step 2.
4. Create an SSID Profile with enterprise security and WPA-2 encryption settings and then
associate the SSID with the hotspot profile created in step 2.
33.2.1
Creating Advertisement Profiles for Hotspot Configuration
A hotspot profile contains one or severaadvertisement profiles. The following advertisement
profiles can be configured through the SCALANCE W CLI:
ANQP advertisement profiles
● NAI Realm profile
● Venue Name Profile
● Network Authentication Profile
● Roaming Consortium Profile
● 3GPP Profile
● IP Address availability Profile
● Domain Name Profile
H2QP advertisement profiles
● Operator Friendly Name Profile
● Connection Capability Profile
● Operating-Class Profile
● WAN-Metrics Profile
Configuring an NAI Realm Profile
You can configure a Network Access Identifier (NAI) Realm profile to define the NAI realm
information, which can be sent as an ANQP IE in a GAS query response.
To configure a NAI profile:
(scalance)(config)# hotspot anqp-nai-realm-profile <name>
(scalance)(nai-realm <name>)# nai-realm-name <name>
(scalance)(nai-realm <name>)# nai-realm-encoding {<utf8>|<rfc4282>}
(scalance)(nai-realm <name>)# nai-realm-eap-method <eap-method>
(scalance)(nai-realm <name>)# nai-realm-auth-id-1 <authentication-ID>

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English