Siemens SCALANCE W1750D UI User Manual

Setting up an AP
4.3 Logging in to the SCALANCE W UI
SCALANCE W1750D UI
34 Configuration Manual, 02/2018, C79000-G8976-C451-02
4.3
Logging in to the SCALANCE W UI
Launch a web browser and enter http://direct.scalance.com. In the login screen, enter the
following credentials:
● Username — admin
● Password — admin
The following figure shows the
Login
screen:
Figure 4-1 Login Screen
When you use a provisioning Wi-Fi network to connect to the Internet, all browser requests
are directed to the SCALANCE W UI. For example, if you enter www.example.com in the
address bar, you are directed to the SCALANCE W UI. You can change the default login
credentials after the first login.
Regulatory Domains
The IEEE 802.11/b/g/n Wi-Fi networks operate in the 2.4 GHz spectrum and IEEE 802.11a/n
operates in the 5 GHz spectrum. The spectrum is divided into channels. The 2.4 GHz
spectrum is divided into 14 overlapping, staggered 20 MHz wireless carrier channels. These
channels are spaced 5 MHz apart. The 5 GHz spectrum is divided into more channels. The
channels that can be used in a particular country vary based on the regulations of that
country.
The initial Wi-Fi setup requires you to specify the country code for the country in which the
SCALANCE W operates. This configuration sets the regulatory domain for the radio
frequencies that the APs use. Within the regulated transmission spectrum, a high-throughput
802.11ac, 802.11a, 802.11b/g, or 802.11n radio setting can be configured. The available 20
MHz, 40 MHz, or 80 MHz channels are dependent on the specified country code.

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English