Siemens SCALANCE W1750D UI

Deep Packet Inspection and Application Visibility
22.4 Enabling URL Visibility
SCALANCE W1750D UI
366 Configuration Manual, 02/2018, C79000-G8976-C451-02
22.4
Enabling URL Visibility
Enabling URL visibility allows the AP to extract the full URL information of the HTTP and
HTTPS sessions and periodically log them on the ALE server. Full URL visibility for HTTP
sessions fed to ALE are exposed as Northbound APIs, and are used by URL analytical
engines for advanced client URL data mining and analysis.
You can enable URL visibility by using the SCALANCE W UI or the CLI:
In the SCALANCE W UI
To enable URL visibility:
1. Navigate to
System > General
.
2. Select
Enabled
from the
URL visibility
drop-down list.
3. Click
OK
.
In the CLI
To enable URL visibility:
(scalance)(config)# url-visibility
(scalance)(config)# end
(scalance)# commit apply