Siemens SCALANCE W1750D UI

Hotspot Profiles
33.2 Configuring Hotspot Profiles
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
509
●
Load duration
—Indicates the duration in seconds during which the downlink utilization is
measured.
●
Symmetric links
—Indicates if the uplink and downlink have the same speed.
●
WAN Link Status
—Indicates if the WAN is down (link-down), up (link-up), or in test state
(link-under-test).
33.2.2
Creating a Hotspot Profile
To create a hotspot profile:
(scalance)(config)# hotspot hs-profile <name>
(scalance)(Hotspot2.0 <name>)# asra
(scalance)(Hotspot2.0 <name>)# access-network-type <type>
(scalance)(Hotspot2.0 <name>)# addtl-roam-cons-ois <roam-consortium-OIs>
(scalance)(Hotspot2.0 <name>)# comeback-mode
(scalance)(Hotspot2.0 <name>)# gas-comeback <delay-interval>
(scalance)(Hotspot2.0 <name>)# group-frame-block
(scalance)(Hotspot2.0 <name>)# hessid <hotspot-essid>
(scalance)(Hotspot2.0 <name>)# internet
(scalance)(Hotspot2.0 <name>)# p2p-cross-connect
(scalance)(Hotspot2.0 <name>)# p2p-dev-mgmt
(scalance)(Hotspot2.0 <name>)# pame-bi
(scalance)(Hotspot2.0 <name>)# query-response-length-limit <integer>
(scalance)(Hotspot2.0 <name>)# roam-cons-len-1 <integer>
(scalance)(Hotspot2.0 <name>)# roam-cons-len-2 <integer>
(scalance)(Hotspot2.0 <name>)# roam-cons-len-3 <integer>
(scalance)(Hotspot2.0 <name>)# roam-cons-oi-1 <integer>
(scalance)(Hotspot2.0 <name>)# roam-cons-oi-2 <integer>
(scalance)(Hotspot2.0 <name>)# roam-cons-oi-3 <integer>
(scalance)(Hotspot2.0 <name>)# venue-group <group>
(scalance)(Hotspot2.0 <name>)# venue-type <type>
(scalance)(Hotspot2.0 <name>)# enable
(scalance)(Hotspot2.0 <name>)# end
(scalance)# commit apply