Hotspot Profiles
33.2 Configuring Hotspot Profiles
SCALANCE W1750D UI
508 Configuration Manual, 02/2018, C79000-G8976-C451-02
(scalance)(connection-capabilities <name>)# udp-voip
(scalance)(connection-capabilities <name>)# enable
(scalance)(connection-capabilities <name>)# end
(scalance)# commit apply
Configuring an Operating-Class Profile
You can configure an operating-class profile to list the channels on which the hotspot is
capable of operating. To configure an H2QP operating-class profile:
(scalance)(config) # hotspot h2qp-oper-class-profile <name>
(scalance)(operator-class <name>)# op-class <class-ID>
(scalance)(operator-class <name>)# enable
(scalance)(operator-class <name>)# end
(scalance)# commit apply
Configuring a WAN Metrics Profile
You can configure a WAN metrics profile to define information about access network
characteristics such as link status and metrics.
To configure a WAN metrics profile:
(scalance)(config)# hotspot h2qp-wan-metrics-profile <name>
(scalance)(WAN-metrics <name>)# at-capacity
(scalance)(WAN-metrics <name>)# downlink-load <load>
(scalance)(WAN-metrics <name>)# downlink-speed <speed>
(scalance)(WAN-metrics <name>)# load-duration <duration>
(scalance)(WAN-metrics <name>)# symm-link
(scalance)(WAN-metrics <name>)# uplink-load <load>
(scalance)(WAN-metrics <name>)# uplink-speed <speed>
(scalance)(WAN-metrics <name>)# wan-metrics-link-status <status>
(scalance)(WAN-metrics <name>)# end
(scalance)# commit apply
You can specify the following WAN downlink and uplink parameters:
●
—Indicates the percentage of the WAN downlink currently utilized. The
default value of 0 indicates that the downlink speed is unknown or unspecified.
●
—Indicates the WAN downlink speed in Kbps.
●
—Indicates the percentage of the WAN uplink currently utilized. The default
value of 0 indicates that the downlink speed is unknown or unspecified.
●
—Indicates the WAN uplink speed in Kbps.
To Next Page
Loading...
Need help?
General
