Captive Portal for Guest Access
13.9 Configuring Walled Garden Access
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
195
To create a walled garden access:
(scalance)(config)# wlan walled-garden
(scalance)(Walled Garden)# white-list <domain>
(scalance)(Walled Garden)# black-list <domain>
(scalance)(Walled Garden)# end
(scalance)# commit apply
Disabling Captive Portal Authentication
To disable captive portal authentication:
1. Select a wireless or wired profile. Depending on the network profile selected, the
or
window is displayed.
Note
You can also customize splash page design on the Security
tab of
(WLAN
wizard) and New Wired Network
(wired profile window) when configuring a new profile
2. Navigate to the
tab.
3. Select
from the
drop-down list. Although the splash page is
disabled, you can enable MAC authentication, configure authentication servers, set
accounting parameters, blacklist clients based on MAC authentication failures, and
configure encryption keys for authorized access.
4. If required, configure the security parameters
5. Click
and then click
to apply the changes
To Next Page
Loading...
Need help?
General
