Siemens SCALANCE W1750D UI

Customizing AP Settings
8.9 Removing an AP from the Network
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
99
8.9
Removing an AP from the Network
You can remove an AP from the network by using the SCALANCE W UI, only if the Auto-
Join feature is disabled.
In the SCALANCE W UI
To remove an AP from the network:
1. On the
Access Points
tab, click the AP to delete. The
x
icon is displayed beside the AP.
2. Click
x
to confirm the deletion.
Note
The deleted APs cannot join the SCALANCE W network anymore and are not displayed in
the SCALANCE W UI. However, the master AP details cannot be deleted from the VC
database.