SCALANCE W User Interface
6.2 Main Window
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
55
The
link displays a window that allows you to maintain the Wi-Fi network. The
window consists of the following tabs:
●
— Displays the name of the product, build time, AP model name, the SCALANCE
W version, website address of Siemens, and copyright information.
●
— Displays the following details:
–
— Displays the current configuration details.
–
— Allows you to clear the current configuration details of the
network.
–
— Allows you to back up local configuration details. The backed
up configuration data is saved in the file named
.
–
— Allows you to restore the backed up configuration. After
restoring the configuration, the AP must be rebooted for the changes to take effect.
●
—Displays information about the certificates installed on the AP. You can also
upload new certificates to the AP database.
For more information, see Uploading
Certificates (Page 238).
●
—Displays the current firmware version and provides various options to
upgrade to a new firmware version.
For more information, see Upgrading an AP
(Page 471).
●
—Displays the APs in the network and provides an option to reboot the required
AP or all APs.
For more information, see Upgrading an AP (Page 471).
●
—Provides an option to convert an AP to a Mobility Controller managed Remote
AP or Campus
AP, or to the default VC mode. For more information, see Converting an AP to a Remote AP
and Campus AP (Page 474) on page 350.
To Next Page
Loading...
Need help?
General
