Siemens SCALANCE W1750D UI

Hotspot Profiles
33.2 Configuring Hotspot Profiles
SCALANCE W1750D UI
512 Configuration Manual, 02/2018, C79000-G8976-C451-02
(scalance)(Hotspot2.0 <name>)# advertisement-profile h2qp-conn-cap <name>
(scalance)(Hotspot2.0 <name>)# advertisement-profile h2qp-oper-class <name>
(scalance)(Hotspot2.0 <name>)# advertisement-profile h2qp-oper-name <name>
(scalance)(Hotspot2.0 <name>)# advertisement-profile h2qp-wan-metrics <name>
(scalance)(Hotspot2.0 <name>)# end
(scalance)# commit apply
The configuration parameters for associating an advertisement profile with a hotspot profile
are described in the following table:
Table 33- 4 Advertisement Profile Association Parameters
Parameter
Description
advertisement-profile Specify the advertisement profile to associate with this hotspot profile.
For information on advertisement profiles, see
Creating Advertisement
Profiles for Hotspot Configuration (Page 500).
advertisement-protocol Specify the advertisement protocol type; for example, specify the Ac-
cess Network Query Protocol (ANQP) as anqp.
33.2.4
Creating a WLAN SSID and Associating Hotspot Profile
To create a WLAN SSID with Enterprise Security and WPA-2 Encryption Settings:
(scalance)(config)# wlan ssid-profile <name> (scalance)(SSID Profile <name>)# essid
<ESSID-name>
(scalance)(SSID Profile <name>)# type {<Employee> | <Voice>| <Guest>}
(scalance)(SSID Profile <name>)# vlan <vlan-ID>
(scalance)(SSID Profile <name>)# set-vlan <attribute>{equals|not-equals|starts-
with|ends-
with|contains} <operator> <VLAN-ID>| value-of}
(scalance)(SSID Profile <name>)# opmode {wpa2-aes|wpa-tkip,wpa2-aes}
(scalance)(SSID Profile <name>)# blacklist
(scalance)(SSID Profile <name>)# mac-authentication
(scalance)(SSID Profile <name>)# l2-auth-failthrough
(scalance)(SSID Profile <name>)# termination
(scalance)(SSID Profile <name>)# external-server
(scalance)(SSID Profile <name>)# auth-server <server-name>
(scalance)(SSID Profile <name>)# server-load-balancing
(scalance)(SSID Profile <name>)# radius-accounting
(scalance)(SSID Profile <name>)# radius-accounting-mode {user-authentication| user-
association}