Siemens SCALANCE W1750D UI

SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
197
Authentication and User Management
14
14.1
Managing AP Users
The AP users can be classified as follows:
● Administrator—An admin user who creates SSIDs, wired profiles, and DHCP server
configuration parameters; and manages the local user database. The admin users can
access the VC Management UI.
● Guest administrator—A guest interface management user who manages guest users
added in the local user database.
● Administrator with read-only access—The read-only admin user does not have access to
the SCALANCE W CLI. The SCALANCE W UI will be displayed in the read-only mode for
these users.
● Employee users—Employees who use the enterprise network for official tasks.
● Guest users—Visiting users who temporarily use the enterprise network to access the
Internet.
The user access privileges are determined by AP management settings in the AirWave
Management client, and the type of the user. The following table outlines the access
privileges defined for the admin user, guest management interface admin, and read-only
users
Table 14- 1 User Privileges
User Category
AMP in Management Mode
AP in Monitor Mode or without AMP l
administrator Access to local user database only Complete access to the AP
read-only administrator
No write privileges
No write privileges
guest administrator
Access to local user database only
Access to local user database only