Siemens SCALANCE W1750D UI User Manual

Uplink Configuration
26.5 Uplink Preferences and Switching
SCALANCE W1750D UI
438 Configuration Manual, 02/2018, C79000-G8976-C451-02
(scalance)(uplink)# end
(scalance)# commit apply
To enable uplink switching based on Internet availability:
(scalance)(config)# uplink
(scalance)(uplink)# failover-internet
(scalance)(uplink)# failover-internet-ip <ip>
(scalance)(uplink)# failover-internet-pkt-lost-cnt <count>
(scalance)(uplink)# failover-internet-pkt-send-freq <frequency>
(scalance)(uplink)# end
(scalance)# commit apply
26.5.5
Viewing Uplink Status and Configuration
To view the uplink status:
(scalance)# show uplink status
Uplink preemption :enable
Uplink preemption interval 600
Uplink enforce :none
Ethernet uplink eth0 :DHCP
Uplink Table
Type State Priority In Use
---- ----- -------- ------
eth0 UP 2 Yes
Wifi-sta INIT 1 No
3G/4G INIT 3 No
Internet failover :enable
Internet failover IP :192.2.0.1
Max allowed test packet loss :10
Secs between test packets 30
VPN failover timeout (secs) 180
Internet check timeout (secs) 10
ICMP pkt sent 1
ICMP pkt lost 1
Continuous pkt lost 1
VPN down time 0

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English