Siemens SCALANCE W1750D UI User Manual

Captive Portal for Guest Access
13.8 Configuring Captive Portal Roles for an SSID
SCALANCE W1750D UI
190 Configuration Manual, 02/2018, C79000-G8976-C451-02
13.8
Configuring Captive Portal Roles for an SSID
You can configure an access rule to enforce captive portal authentication for SSIDs that use
802.1X authentication to authenticate clients. You can configure rules to provide access to
external or internal captive portal, so that some of the clients using this SSID can derive the
captive portal role.
The following conditions apply to the 802.1X and captive portal authentication configuration:
he following conditions apply to the 802.1X and captive portal authentication configuration:
● If a user role does not have captive portal settings configured, the captive portal settings
configured for an SSID are applied to the client's profile.
● If the SSID does not have captive portal settings configured, the captive portal settings
configured for a user role are applied to the client's profile.
● If captive portal settings are configured for both SSID and user role, the captive portal
settings configured for a user role are applied to the client's profile.
You can create a captive portal role for both
Internal
and
External
splash page types. To
enforce the captive portal role, use the SCALANCE W UI or the CLI.
In the SCALANCE W UI
To create a captive portal role:
1. Select an SSID profile from the
Network
tab. The
Edit <WLAN-Profile>
window is
displayed.
2. On the
Access
tab, move the slider to
Role-based
access control by using the scroll bar.
3. Select a role or create a new one if required.
4. Click
New
to add a new rule. The
New Rule
window is displayed.

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English