Siemens SCALANCE W1750D UI

Services
24.5 Configuring OpenDNS Credentials
SCALANCE W1750D UI
402 Configuration Manual, 02/2018, C79000-G8976-C451-02
24.5
Configuring OpenDNS Credentials
When configured, the OpenDNS credentials are used by SCALANCE W to access
OpenDNS to provide enterprise level content filtering. You can configure OpenDNS
credentials by using the SCALANCE W UI or the CLI.
In the SCALANCE W UI
To configure OpenDNS credentials:
1. Click
More > Services > OpenDNS
.
2. Enter the
Username
and
Password
to enable access to OpenDNS.
3. Click
OK
to apply the changes.
In the CLI
To configure OpenDNS credentials:
(scalance)(config)# opendns <username> <password>
(scalance)(config)# end
(scalance)# commit apply