Siemens SCALANCE W1750D UI

Hotspot Profiles
33.2 Configuring Hotspot Profiles
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
507
Configuring an IP Address Availability Profile
You can configure an available IP address types to send information on IP address
availability as an ANQP IE in a GAS query response.
To configure an IP address availability profile:
(scalance)(config)# hotspot anqp-ip-addr-avail-profile <name>
(scalance)(IP-addr-avail <name>)# ipv4-addr-avail
(scalance)(IP-addr-avail <name>)# ipv6-addr-avail
(scalance)(IP-addr-avail <name>)# enable
(scalance)(IP-addr-avail <name>)# end
(scalance)# commit apply
Configuring an Operator-Friendly Profile
You can configure an operator-friendly name profile to define the identify the operator. To
configure an H2QP operator-friendly name profile:
(scalance)(config)# hotspot h2qp-oper-name-profile <name>
(scalance)(operator-friendly-name <name>)# op-fr-name <op-fr-name>
(scalance)(operator-friendly-name <name>)# op-lang-code <op-lang-code>
(scalance)(operator-friendly-name <name>)# enable
(scalance)(operator-friendly-name <name>)# end
(scalance)# commit apply
Configuring a Connection Capability Profile
You can configure a connection capability profile to define information such as the hotspot IP
protocols and associated port numbers that are available for communication.
To configure an H2QP connection capability profile:
(scalance)(config) # hotspot h2qp-conn-cap-profile <name>
(scalance)(connection-capabilities <name>)# esp-port
(scalance)(connection-capabilities <name>)# icmp
(scalance)(connection-capabilities <name>)# tcp-ftp
(scalance)(connection-capabilities <name>)# tcp-http
(scalance)(connection-capabilities <name>)# tcp-pptp-vpn
(scalance)(connection-capabilities <name>)# tcp-ssh
(scalance)(connection-capabilities <name>)# tcp-tls-vpn
(scalance)(connection-capabilities <name>)# tcp-voip
(scalance)(connection-capabilities <name>)# udp-ike2
(scalance)(connection-capabilities <name>)# udp-ipsec-vpn