Setting up an AP
4.3 Logging in to the SCALANCE W UI
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
35
You cannot change the country code for the APs in the restricted regulatory domains such
as US and Japan for most of the AP models. For AP-RW variants, you can select from the
list of supported regulatory domains. If the supported country code is not in the list, contact
your Siemens Support team to know if the required country code is supported and obtain the
software that supports the required country code.
Improper country code assignments can disrupt wireless transmissions. Most countries
impose penalties and sanctions on operators of wireless networks with devices set to
improper country codes.
To view the country code information, run the
command.
Note
This procedure is applicable only to the AP
-RW variants. Skip this step if you are installing
AP in the United States or Japan.
The
window is displayed for the AP-RW variants when you log in to the AP UI
for the first time. The
Please Specify the Country Code
drop-down list displays only the
supported country codes. If the AP cluster consists of multiple AP platforms, the country
codes supported by the master AP is displayed for all other APs in the cluster. Select a
country code from the list and click
. The AP operates in the selected country code
domain.
You can also view the list of supported country codes for the AP-RW variants using the
command.
To Next Page
Loading...
Need help?
General
