Siemens SCALANCE W1750D UI

Wired Profiles
12.1 Configuring a Wired Profile
SCALANCE W1750D UI
150 Configuration Manual, 02/2018, C79000-G8976-C451-02
In the CLI
To configure VLAN settings for a wired profile:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# switchport-mode {trunk|access}
(scalance)(wired ap profile <name>)# allowed-vlan <vlan>
(scalance)(wired ap profile <name>)# native-vlan {<guest|1…4095>}
(scalance)(wired ap profile <name>)# end
(scalance)# commit apply
To configure a new VLAN assignment rule:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# set-vlan <attribute>{equals|not-equals|starts-
with| ends-with|contains| matches-regular-expression} <operator> <VLAN-ID>|value-of}
(scalance)(wired ap profile <name>)# end
(scalance)# commit apply