Siemens SCALANCE W1750D UI User Manual

Captive Portal for Guest Access
13.3 Configuring Wired Profile for Guest Access
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
171
–
Network Assigned
: Select this option to allow the clients to receive an IP address from
the network to which the VC is connected. On selecting this option, the
New
button to
create a VLAN is displayed.
Create a new VLAN if required.
If the
Trunk
mode is selected:
– Specify the
Allowed VLAN
, enter a list of comma separated digits or ranges: for
example, 1,2,5 or 1– 4, or all. The Allowed VLAN refers to the VLANs carried by the
port in Access mode.
– If the
Client IP Assignment
is set to
Network Assigned
, specify a value for
Native
VLAN
. A VLAN that does not have a VLAN ID tag in the frames is referred to as
Native VLAN.
You can specify a value within the range of 1–4093.
If the
Access
mode is selected:
– If the
Client IP Assignment
is set to
Virtual Controller Assigned
, proceed to step 2.
– If the
Client IP Assignment
is set to
Network Assigned
, specify a value for
Access
VLAN
to indicate the VLAN carried by the port in the
Access
mode
6. Click
Next
to configure internal or external captive portal authentication, roles, and access
rules for the guest users.
In the CLI
To configure the settings for the wired profile:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# type <guest>
(scalance)(wired ap profile <name>)# speed {10|100|1000|auto}
(scalance)(wired ap profile <name>)# duplex {half|full|auto}
(scalance)(wired ap profile <name>)# no shutdown
(scalance)(wired ap profile <name>)# poe
(scalance)(wired ap profile <name>)# uplink-enable
(scalance)(wired ap profile <name>)# content-filtering
(scalance)(wired ap profile <name>)# spanning-tree
To configure VLAN settings for a wired profile:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# switchport-mode {trunk|access}
(scalance)(wired ap profile <name>)# allowed-vlan <vlan>
(scalance)(wired ap profile <name>)# native-vlan {<guest|1…4095>}
To configure a new VLAN assignment rule:
(scalance)(config)# wired-port-profile <name>
(scalance)(wired ap profile <name>)# set-vlan <attribute>{equals|not-equals|starts-
with|ends-with|contains|matches-regular-expression} <operator> <VLAN-ID>|value-of}

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English