Siemens SCALANCE W1750D UI User Manual

Authentication and User Management
14.11 Configuring WISPr Authentication
SCALANCE W1750D UI
234 Configuration Manual, 02/2018, C79000-G8976-C451-02
9. Enter the name of the Hotspot location in the
Location name
text box. If no name is
defined, the name of the AP to which the user is associated is used.
10. Click
OK
to apply the changes.
The WISPr RADIUS attributes and configuration parameters are specific to the RADIUS
server used by your ISP for the WISPr authentication. Contact your ISP to determine these
values. You can find a list of ISO and ITU country and area codes at the ISO and ITU
websites (www.iso.org and http://www.itu.int).
Note
A Boingo smart cli
ent uses a NAS identifier in the <CarrierID>_<VenueID> format for
location identification. To support Boingo clients, ensure that you configure the NAS identifier
parameter in the RADIUS server profile for the WISPr server
In the CLI
(scalance)(config)# wlan wispr-profile
(scalance)(WISPr)# wispr-location-id-ac
(scalance)(WISPr)# wispr-location-id-cc
(scalance)(WISPr)# wispr-location-id-isocc
(scalance)(WISPr)# wispr-location-id-network
(scalance)(WISPr)# wispr-location-name-location
(scalance)(WISPr)# wispr-location-name-operator-name
(scalance)(WISPr)# end
(scalance)# commit apply

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English