Siemens SCALANCE W1750D UI

Security recommendations
SCALANCE W1750D UI
24 Configuration Manual, 02/2018, C79000-G8976-C451-02
Available protocols per port
The following list provides you with an overview of the open ports on this device. The table
includes the following columns:
● Protocol
All protocols that the device supports
● Port number
Port number assigned to the protocol
● Port status
– Open: The port is always open and cannot be closed.
● Factory setting
– Open: The factory setting of the port is "Open".
– Closed: The factory setting of the port is "Closed".
● Authentication
Specifies whether or not the protocol is authenticated.
Protocol
Port number
Port status
Factory setting of the port
Authentication
Air Monitor
UDP/1144
Open
Open
Yes
Airgroup
UDP/53536
Open
Open
Yes
Airgroup Master to slave
UDP/53535
Open
Open
No
Bootps
UDP/67
Open
Open
No
Captive portal
TCP/8080
Open
Open
Yes
DHCP
UDP/1067
Open
Open
No
UDP/4011
Open
Open
No
DTLS
UDP/4433
Open
Open
Yes
HTTP
TCP/80
Open
Open
Yes
TCP/4343
Open
Open
Yes
HTTPS
TCP/43430
Open
Open
Yes
TCP/443
Open
Open
Yes
mDNS
UDP/5353
Open
Open
No
NTP
UDP/123
Open
Open
No
Proprietary
UDP/8209
Open
Open
No
UDP/8211
Open
Open
No
Proprietary (dTable)
UDP/8612
Open
Open
No
RADIUS
UDP/1616
Open
Open
No
UDP/1892
Open
Open
No
SNMP
UDP/161
Open
Open
Yes
SSH
TCP/22
Open
Open
Yes
TCP/2322
Open
Open
Yes
Syslog
UDP/514
Open
Open
No
Telnet
TCP/23
Open
Open
Yes