Siemens SCALANCE W1750D UI

Dynamic DNS Registration
18.1 Enabling Dynamic DNS
SCALANCE W1750D UI
300 Configuration Manual, 02/2018, C79000-G8976-C451-02
Parameter
Description
Example
Interval Specify the time interval (in secs) at which the DNS
updates are to be synced to the server. The default
time interval is 12 hours, minimum time
interval is 15 minutes, and maximum time interval is
100 days.
900
2. Select the
Enable Dynamic DNS
check box.
3. Click
OK
.
In the CLI
To enable dynamic DNS on an AP
(scalance)(config)# dynamic-dns-ap
(scalance)(config)# end
(scalance)# commit apply
To configure a TSIG key and server IP address:
(scalance)(config)# dynamic-dns-ap key <algo-name:keyname:keystring>
(scalance)(config)# dynamic-dns-ap server <ddns_server>
(scalance)(config)# end
(scalance)# commit apply
To configure a time interval:
(scalance)(config)# dynamic-dns-interval <ddns_interval>
(scalance)(config)# end
(scalance)# commit apply