Siemens SCALANCE W1750D UI User Manual

Voice and Video
23.1 Wi-Fi Multimedia Traffic Management
SCALANCE W1750D UI
378 Configuration Manual, 02/2018, C79000-G8976-C451-02
By customizing WMM AC mappings, all packets received are matched against the entries in
the mapping table and prioritized accordingly. The mapping table contains information for
upstream (client to AP) and downstream (AP to client) traffic.
You can configure different WMM to DSCP mapping values for each WMM AC when
configuring an SSID profile by using the SCALANCE W UI or the CLI.
In the SCALANCE W UI
To configure DSCP mapping values:
1. Navigate to the WLAN wizard.
– Click
Network > New
or
– Click
Network
, and select the
WLAN SSID > edit
.
2. Click
Show advanced options
under
WLAN Settings
.
3. Specify the appropriate DSCP mapping value within a range of 0–63 for the following
access categories in the
DSCP mapping
text box:
–
Background WMM
—DSCP mapping for the background traffic.
–
Best effort WMM
—DSCP mapping for the best-effort traffic.
–
Video WMM
—DSCP mapping for the video traffic.
–
Voice WMM
—DSCP mapping for the voice traffic.
4. Click
Next
and complete the configuration as required.
In the CLI
Configuring DSCP settings on an SSID:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# wmm-background-dscp <dscp>
(scalance)(SSID Profile <name>)# wmm-best-effort-dscp <dscp>
(scalance)(SSID Profile <name>)# wmm-video-dscp <dscp>
(scalance)(SSID Profile <name>)# wmm-voice-dscp <dscp>
(scalance)(SSID Profile <name>)# end
(scalance)# commit apply
You can configure up to 8 DSCP mappings values within the range of 0-63. You can also
configure a combination of multiple values separated by a comma, for example,
wmm-voice-
dscp 46,44,42,41

Siemens SCALANCE W1750D UI Specifications

General

Brand	Siemens
Model	SCALANCE W1750D UI
Category	Wireless Access Point
Language	English