Siemens SCALANCE W1750D UI

Spectrum Monitor
30.1 Understanding Spectrum Data
SCALANCE W1750D UI
462 Configuration Manual, 02/2018, C79000-G8976-C451-02
Figure 30-1 Device List
Table 30- 1 Device Summary and Channel Information
Column
Description
Type Device type. This parameter can be any of the following:
• Audio FF (fixed frequency)
• Bluetooth
• Cordless base FH (frequency hopper)
• Cordless phone FF (fixed frequency)
• Cordless network FH (frequency hopper)
• Generic FF (fixed frequency)
• Generic FH (frequency hopper)
• Generic interferer
• Microwave
• Microwave inverter
• Video
• Xbox
NOTE:
For additional details about non-Wi-Fi device types shown in this table, see
Non-Wi-Fi Interferer Types.
ID ID number assigned to the device by the spectrum monitor or hybrid AP
radio. Spectrum monitors and hybrid APs assign a unique spectrum ID per
device type.
Cfreq
Center frequency of the signal sent from the device.
Bandwidth
Channel bandwidth used by the device.
Channels-affected
Radio channels affected by the wireless device.
Signal-strength
Strength of the signal sent from the device, represented in dBm.
Duty-cycle Device duty cycle. This value represents the percent of time the device
broadcasts a signal.
Add-time
Time at which the device was first detected.
Update-time
Time at which the device’s status was updated.