Siemens SCALANCE W1750D UI

Hotspot Profiles
33.3 Sample Configuration
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
515
(scalance)(IP-addr-avail "ip1")# no ipv4-addr-avail
(scalance)(IP-addr-avail "ip1")# ipv6-addr-avail
(scalance)(IP-addr-avail "ip1")# exit
(scalance)(config)# hotspot anqp-domain-name-profile dn1
(scalance)(domain-name "dn1")# domain-name DomainName
(scalance)(domain-name "dn1")# exit
(scalance)(config)# hotspot h2qp-oper-name-profile on1
(scalance)(operator-friendly-name"on1")# op-lang-code eng
(scalance)(operator-friendly-name"on1")# op-fr-name OperatorFriendlyName
(scalance)(operator-friendly-name"on1")# exit
(scalance)(config) # hotspot h2qp-conn-cap-profile <name>
(scalance)(connection-capabilities <name>)# esp-port
(scalance)(connection-capabilities <name>)# icmp
(scalance)(connection-capabilities <name>)# tcp-ftp
(scalance)(connection-capabilities <name>)# tcp-http
(scalance)(connection-capabilities <name>)# tcp-pptp-vpn
(scalance)(connection-capabilities <name>)# tcp-ssh
(scalance)(connection-capabilities <name>)# tcp-tls-vpn
(scalance)(connection-capabilities <name>)# tcp-voip
(scalance)(connection-capabilities <name>)# udp-ike2
(scalance)(connection-capabilities <name>)# udp-ipsec-vpn
(scalance)(connection-capabilities <name>)# udp-voip
(scalance)(connection-capabilities <name>)# enable
(scalance)(connection-capabilities <name>)# exit
(scalance)(config) # hotspot h2qp-oper-class-profile <profile>
(scalance)(operator-class <name>)# op-class <class-ID>
(scalance)(operator-class <name>)# enable
(scalance)(operator-class <name>)# exit
(scalance)(config)# hotspot h2qp-wan-metrics-profile <name>
(scalance)(WAN-metrics <name>)# at-capacity
(scalance)(WAN-metrics <name>)# downlink-load <load>