Hotspot Profiles
33.3 Sample Configuration
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
517
Step 3: Associating advertisement profiles with the hotspot profile
(scalance)# configure terminal
(scalance)(config)# hotspot hs-profile hs1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile anqp-nai-realm nr1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile anqp-venue-name vn1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile anqp-nwk-auth na1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile anqp-roam-cons rc1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile anqp-3gpp 3g1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile anqp-ip-addr-avail ip1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile anqp-domain-name dn1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile h2qp-oper-name on1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile h2qp-wan-metrics wm1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile h2qp-conn-cap cc1
(scalance)(Hotspot2.0 "hs1")# advertisement-profile h2qp-oper-class oc1
(scalance)(Hotspot2.0 "hs1")# end
(scalance)# commit apply
Step 4: Associating the hotspot profile with WLAN SSID:
(scalance)# configure terminal
(scalance)# wlan ssid-profile ssidProfile1
(scalance)(SSID Profile "ssidProfile1")# essid hsProf
(scalance)(SSID Profile "ssidProfile1")# type employee
(scalance)(SSID Profile "ssidProfile1")# vlan 200
(scalance)(SSID Profile "ssidProfile1")# opmode wpa2-aes
(scalance)(SSID Profile "ssidProfile1")# blacklist
(scalance)(SSID Profile "ssidProfile1")# mac-authentication
(scalance)(SSID Profile "ssidProfile1")# l2-auth-failthrough
(scalance)(SSID Profile "ssidProfile1")# radius-accounting
(scalance)(SSID Profile "ssidProfile1")# radius-accounting-mode user-association
(scalance)(SSID Profile "ssidProfile1")# radius-interim-accounting-interval 10
(scalance)(SSID Profile "ssidProfile1")# radius-reauth-interval 20
(scalance)(SSID Profile "ssidProfile1")# max-authentication-failures 2
(scalance)(SSID Profile "ssidProfile1")# set-role-by-ssid
(scalance)(SSID Profile "ssidProfile1")# hotspot-profile hs1
(scalance)(SSID Profile "ssidProfile1")# end
(scalance)# commit apply