AP-VPN Deployment Scenarios
35.2 Scenario 2 - IPsec: Single Datacenter with Multiple controllers for Redundancy
SCALANCE W1750D UI
540 Configuration Manual, 02/2018, C79000-G8976-C451-02
AP-Connected Switch Configuration
Client VLANs defined in this example must be opened on the upstream switches in multiple
AP deployments, as client traffic from the slave to the master is tagged with the client VLAN.
For information on controller configuration, see Configuring a Controller for AP-VPN
Operations. Ensure that the upstream router is configured with a static route pointing to the
controller for the L3 VLAN.
To Next Page
Loading...
Need help?
General
