24
Introduction
Chapter 1 DVS-9000 Functions
Introduction
This manual is the User’s Guide for the DVS-9000/9000SF Production
Switcher system supporting the SDTV signal format only. The DVS-9000 and
DVS-9000SF have different numbers of M/E banks and input/output signals,
but are otherwise functionally identical.
This manual refers to these generically as the “DVS-9000 system,” and
describes principally the operation of the system using the CCP-9000 series of
center control panels.
The User's Guide for this system comprises three volumes.
For the contents of each volume, see the section “Organization of This User’s
Guide” at the front of this volume.
Devices and system nomenclature
In this manual, when discussing the principal components of the DVS-9000
system, in place of the formal product names, abbreviated names
characterizing the functions and features are sometimes used. When
distinctions between system configurations must be drawn, the terms in the
following table are used.
Principal components and naming
The formal product names of the principal components of the DVS-9000
system, and the terms used in this manual are as follows.
System nomenclature
The following terms are used for systems, depending on the combination of
installed options, and the signal format.
Formal product name Term used in this manual
DVS-9000/9000SF Production Switcher
Processor
Switcher or switcher processor
BKDS-9470 DME Board Set DME or DME board set or BKDS-9470
MVE-8000A Multi Format DME Processor DME or DME processor or MVE-8000A
MVE-9000 Multi Format DME Processor DME or DME processor or MVE-9000
CCP-9000/9000A-series Center Control
Panel
Control panel or center control panel
DCU-8000 (MKS-8700) Device Control Unit DCU or MKS-8700
DCU-2000 (MKS-2700) Device Control Unit DCU or MKS-2700
To Next Page
Loading...
