34
Basic Video Processing
Chapter 1 DVS-9000 Functions
You can also specify the wipe direction, or set the pattern position, applying
various changes and modifiers to the selected DME wipe pattern.
For details, see Chapter 6 “DME Wipes” (page 233).
Frame Memory
Frame memory is a function for using a still image or video (frame memory
clip) as material for editing.
You can create a still image by capturing a frame of input video or a clip by
specifying a range of input video. The created images and clips can be written
to memory for playback, editing, and output.
For details, see Chapter 7 “Frame Memory” (page 267).
Color Backgrounds
This function can be used to obtain color background video.
Two color signals generated from the dedicated generators can be switched or
mixed, and then output.
For details, see “Color Background” (page 314).
Copy and Swap
This function can be used to copy and swap the settings among the M/E-1 to
M/E-3, and PGM/PST banks or between keyers.
The following settings can be copied or swapped.
• Overall settings for the M/E and PGM/PST banks
• Keyer settings
• Wipe settings in a transition control block
• Wipe settings in an independent key transition control block
• DME wipe settings in a transition control block
• DME wipe settings in an independent key transition control block
• Matte data (color 1, color 2, and how to compose them)
• Color settings
• DME channel settings
For details, see “Copy and Swap” (page 318).
To Next Page
Loading...
