Chapter 11 DME Operations
490
DME Special Effect Operations
3
Set the following parameters.
4
Press [Flat Color] and set the parameters for the color of the depths of the
picture.
Applying the Fade effect
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF3 ‘Dim &
Fade.’
The Dim & Fade menu appears.
2
Press [Fade], turning it on.
This enables the Fade effect.
3
Set the parameters.
Glow Settings
Applying the Glow effect
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF4 ‘Glow.’
The Glow menu appears.
2
Press [Glow], turning it on.
Knob Parameter Adjustment Setting values
1 Start Point where dimming starts (dim
start point)
–100.00 to +100.00
2 Gain Degree of dimming 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Start Point where fading starts (fade
start point)
–100.00 to +100.00
2 Gain Degree of fading 0.00 to 100.00
To Next Page