Sony DVS-9000 System - Exporting Source Names and Destination Names; Making Settings for Audio Mixer

901Cross-Point Settings (Xpt Assign Menu)
Chapter 19 Control Panel Setup (Panel)
Exporting Source Names and Destination Names
To send the source names and destination names to the S-Bus, use the
following procedure.
1 In the Panel >XPT Assign menu, press [Name Export].
The Name Export menu appears.
2 Turn the knob to set the station ID.
a) If set to 255, the information is sent to all stations (with display of “All”).
3 Press [Src Name Export].
This exports the source names to the station selected in step 2.
4 Press [Dest Name Export].
This exports the destination names to the station selected in step 2.
Note
Since destination names cannot be selected freely, fixed names are used.
Making Settings for Audio Mixer
Enabling the function to link the audio mixer
Note
For audio mixer operations in this system, it is necessary to set Mixer ESAM-
II for the DCU 9-pin serial port.
For details, see “Serial Port Settings (Serial Port Assign Menu)” (page 1002).
1 In the Panel >Xpt Assign menu, using any of the following methods, select
the M/E bank or bus.
• Press directly on the list on the left of the status area.
• Press the arrow keys in the list on the left, to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter Adjustment Setting values
1 Station ID Station ID setting
1 to 255
a)