Chapter 19 Control Panel Setup (Panel)
902
Cross-Point Settings (Xpt Assign Menu)
2
Press [Audio Follow].
“Enable” appears in the Audio Follow column.
Setting the audio mixer cross-points
To assign an audio mixer cross-point to a switcher cross-point pair (video/key),
carry out the following procedure.
1
In the Panel >Xpt Assign menu, press [Mixer Xpt Assign].
The Mixer Xpt Assign menu appears.
2
In the list on the left, select the number for the setting.
3
In the list on the right, select the audio mixer cross-point (machine
number).
4
Press [Set].
The audio mixer number appears in the Mixer Xpt column.
To Next Page
Loading...
