Sony DVS-9000 System - System Maintenance (Maintenance Menu); Setting the Date and Time

861System Maintenance (Maintenance Menu)
Chapter 18 System Setup (System)
System Maintenance (Maintenance Menu)
• Date and time setting
• Formatting a memory card
• Primary settings for USB external storage device
• Reloading a USB driver
• Formatting the hard disk
• Locking setup menu operations
– For each VF button group, selecting a set of candidate menus to be locked,
then locking all of the candidates using a password. Except for list
scrolling, moving menus, and similar operations, menu operations for all
settings can be locked.
– Changing the password
To display the Maintenance menu
In the Engineering Setup menu, select VF1 ‘System’ and HF7 ‘Maintenance.’
In the status area, the current date and time, and details of the memory card
appear.
Setting the Date and Time
For system date and time settings, use the following procedure.
1 In the System >Maintenance menu, turn the knobs to set the following
parameters.
Parameter group [1/2]
Parameter group [2/2]
The set date and time appears in the “Set” box in the status area.
Knob Parameter Adjustment Setting values
1 Hour Hour 0 to 23
2 Min Minute 0 to 59
3 Sec Second 0 to 59
Knob Parameter Adjustment Setting values
1 Month Month 1 to 12
2 Day Day 1 to 31
3 Year Year 2000 to 2037