959Settings Relating to Keys, Wipes, Frame Memory and Color Correction (Key/Wipe/FM/CCR Menu)
Chapter 20 Switcher Setup (Switcher)
2
In the <Key Auto Drop> group, press the name of the keyer for which you
want the key to be deleted automatically, turning it on.
Automatically Naming and Saving to Frame Memory
In the Switcher >Key/Wipe/FM/CCR menu, press [FM Auto Store], turning it
on.
Selecting the Bank to Make the Settings
In the following procedures, select the bank to which the settings apply using
any of the following methods, then make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The selected bank appears in reverse video.
Selecting the key memory mode
In the <Key Memory> group of the Switcher >Key/Wipe/FM/CCR menu,
select one from Full (full mode)/Simple (simple mode)/Off.
For more details, see “Key Memory” in Chapter 4 (Volume 1).
Selecting the processing order of masks and borders
In the <Mask/Border Process> group of the Switcher >Key/Wipe/FM/CCR
menu, select one of the following.
Mask >Border: Apply the Mask effect, then apply the Border effect.
Border >Mask: Apply the Border effect, then apply the Mask effect.
Selecting the key priority operation mode
In the <Key Priority> group of the Switcher >Key/Wipe/FM/CCR menu, select
one of the following.
Normal: The key priority sequence can be varied freely.
Fix: Fixed at currently set priority sequence.
Knob Parameter Adjustment Setting
values
1 Bank M/E or P/P selection to which settings apply 1 to 4
To Next Page