Sony DVS-9000 System - Exporting Frame Memory Data

Chapter 17 Files
796
Importing and Exporting Files
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
4 Press [T Import].
This transfers the external file to the frame memory register.
Exporting Frame Memory Data
As an example, to save image data from frame memory in a bitmap format on
a memory card, use the following procedure.
1 In the Import/Export menu, press the device selection area on the left to
select [Frame Memory (.BMP)].
2 Press the device selection area on the right to select [Memory Card].
It is not possible to select a directory.
3 Using any of the following methods, select the data you want to export
from the list on the left.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
4 Press [t Export].
This adds the image data from the frame memory in a bitmap format on the
memory card.
Executing export creates a file in the MVS_EXP directory immediately
under root directory. If the directory does not exist, it is automatically
created.
If the specified destination file name already exists, an overwriting
confirmation message appears.
• Select “Yes” to overwrite the data.
• Select “No” to cancel the whole file export operation.
Knob Parameter Adjustment Setting values
1 List L Register selection 1 and upwards
2 List R File selection 1 and upwards
Knob Parameter Adjustment Setting values
1 List L Register selection 1 and upwards
2 List R File selection 1 and upwards