Sony DVS-9000 System - Setting the Screen Aspect Ratio (Format Menu)

841Setting the Screen Aspect Ratio (Format Menu)
Chapter 18 System Setup (System)
Setting the Screen Aspect Ratio (Format
Menu)
Switch the screen aspect ratio to 4:3 or 16:9.
To set the screen aspect ratio, use the System >Format menu.
Setting the screen aspect ratio
1 In the System >Format menu, press [Aspect].
The Aspect menu appears.
2 In the <Screen Aspect> group, select one of the following.
• 16:9
•4:3
• Independ: Set the screen aspect ratio separately for M/E, P/P, and USER
on the switcher, and for each channel independently on the DME.
3 If you selected [Independ] in step 2, select from the following.
Switcher Aspect: Make the setting for the switcher.
DME Aspect: Make the setting for the DME.
A menu appears according to the selection.
4 Carry out either of the following, depending on the selection you made in
step 3.
When you selected [Switcher Aspect]: In each of the <M/E-1>, <M/E-
2>, <M/E-3>, <P/P>, and <USER> groups, select either [16:9] or
[4:3].
When you selected [DME Aspect]: For each of the <CH1> to <CH4>
groups, select either [16:9] or [4:3].
5 To confirm the above setting, press [Aspect Execute].
To cancel the setting and return to the original state, press [Clear] without
pressing [Aspect Execute].
When you press [Aspect Execute], a confirmation message appears.
6 Press [Yes].
This saves the screen aspect ratio setting.