Sony DVS-9000 System - Setting the Border Color

Chapter 11 DME Operations
450
DME Special Effect Operations
•4:3 mode
• 16:9 mode
Setting the border color
The operation differs depending on the DME used (MVE-8000A or BKDS-
9470/MVE-9000).
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 H Border width on left and right
sides
Left value shown
2 V Border width on top and bottom
sides
Top value shown
3 All Border width on all sides Left value shown
5 Density Border density 0.00 to 100.00
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Top Border width on top side –6.00 to +6.00
2 Left Border width on left side –8.00 to +8.00
3 Right Border width on right side –8.00 to +8.00
4 Bottom Border width on bottom side –6.00 to +6.00
5 Density Border density 0.00 to 100.00
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 H Border width on left and right
sides
Left value shown
2 V Border width on top and bottom
sides
Top value shown
3 All Border width on all sides Left value shown
5 Density Border density 0.00 to 100.00
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Top Border width on top side –4.50 to +4.50
2 Left Border width on left side –8.00 to +8.00
3 Right Border width on right side –8.00 to +8.00
4 Bottom Border width on bottom side –4.50 to +4.50
5 Density Border density 0.00 to 100.00