Chapter 11 DME Operations
482
DME Special Effect Operations
Sepia Settings
Applying the Sepia effect
1
In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2
Press [Sepia], turning it on.
The Sepia effect is enabled. You can adjust the degree of mixing between
the sepia image and the original image with the knobs.
3
Set the following parameters.
4
To set the color of the sepia image, press [Sepia Color], turning it on, and
adjust the parameters.
Masking the Sepia effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see “Mask Settings” (page 491).
Mono Settings
Applying the Mono effect
1
In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
Knob Parameter Adjustment Setting values
1 Mix Y Y signal mix amount 0.00 to 100.00
2 Mix C Chroma signal mix amount 0.00 to 100.00
3 Mix All Y signal and chroma signal mix
amount
Mix Y value shown
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
