Chapter 18 System Setup (System)
862
System Maintenance (Maintenance Menu)
2
Press the [Set Date/Time] button.
This sets the current time to the date and time set in step 1, and the setting
in the “Current” box of the status area changes accordingly.
Using a Memory Card
Displaying memory card information
1
Insert the memory card into the memory card slot.
2
In the <USB Storage Device> group of the System >Maintenance menu,
press [Refresh].
Formatting a memory card
Note
Format a memory card before using it for the first time.
1
Insert the memory card in the memory card slot.
2
In the System >Maintenance menu, using either of the following methods,
select the USB device.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
3
In the <USB Storage Device> group, press [Format].
A confirmation message appears.
4
To carry out the formatting, press [YES].
This formats the memory card.
Carrying Out the Primary Setting
To specify a USB device with a storage device connected as a primary device,
use the following procedure.
To Next Page