259DME Wipe Settings for Independent Key Transitions
Chapter 6 DME Wipes
To set the timing of transition completion
1
In the <Crop Mode> group of the Key1 DME Wipe Adjust menu, press
[Crop], turning it on.
2
In the <Crop Mode> group, press [Remove From Begin].
For subsequent operations, see “Setting the timing of transition
completion” (page 254).
Applying a border to a key DME wipe
In the <Edge> group of the Key1 DME Wipe Adjust menu, press [Border],
turning it on.
For subsequent operations, use the same process as in step 4 of “Modifying the
DME wipe pattern edge” (page 249).
To Next Page
Loading...
