292
Still Image Operations
Chapter 7 Frame Memory
Creating an effect with still image files as a keyframe
1
In the Frame Memory menu, select VF1 ‘Still’ and HF5 ‘Create Key
Frame.’
The Create Key Frame menu appears.
• A thumbnail appears for each group of files having the same characters,
except for the last three characters, in the file name.
• When [Pair] is on, only pair files (each pair comprising a main file and
a sub file) appear.
• When [Pair] is off, both single files and pair files all appear.
2
In the frame memory selection area, select the frame memory to be
assigned.
This creates the effect in the user region to which the selected frame
memory is assigned.
For details of the operating procedures, see “Selecting outputs (FM) and
target frame memory” (page 276).
3
Select the desired folder in the folder selection area.
By pressing [More] to switch the display, you can select from a maximum
of 12 folders.
Thumbnails of the files within the selected folder appear.
4
Turn the knob to select the register number in the user region.
Note
To search for an empty register in the user region, use the numeric keypad
control block (see step 3 of “Recalling a Register” in Chapter 13 (Volume
2)).
5
Use the arrow keys or turn the knobs to scroll the thumbnail display of the
files.
6
Select the thumbnail of the files to be used for the keyframe.
Knob Parameter Adjustment Setting values
5 Register Effect register number 1 to 99
Knob Parameter Adjustment Setting values
1 Scroll Thumbnail display
scrolling
1 and upwards
To Next Page
Loading...
