Chapter 11 DME Operations
474
DME Special Effect Operations
Modifying the wipe crop pattern edge
You can apply a border to the wipe crop pattern, or soften the boundary.
1
In the <Edge> group of the Wipe Crop menu, select one of the following.
Border: border
Soft: soft edge
Soft Border: soft border
2
Depending on the selection in step 1, set the following parameters.
• When Border is selected
• When Soft is selected
• When Soft Border is selected
Selecting the signal or color to be inserted in the wipe crop
border
When you are applying a border or soft border to the wipe crop, you can select
the signal or color to be inserted in the border.
1
In the <Border Fill> group of the Wipe Crop menu, select one of the
following.
Flat Color: flat color
1234
Knob Parameter Adjustment Setting values
1 Width Border width 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Soft Edge softness 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Width Border width 0.00 to 100.00
2 Inner Soft Border inner softness 0.00 to 100.00
3 Outer Soft Border outer softness 0.00 to 100.00
To Next Page