Chapter 17 Files
790
Operations on Individual Files
A pull-down menu appears.
2
Press the required folder name.
3
Select the type of data to be displayed.
• To display still image files, press [Still].
• To display clip files, press [Clip].
Creating a frame memory folder on the device (HDD or Memory
Card)
1
In the File menu, press VF5 ‘Frame Mem’ and HF2 ‘Frame Memory
Folder.’
The Frame Memory Folder menu appears. The status area shows the
device status, and a list of files present on the device.
2
In the pull-down menu of the device selection section, select [HDD] or
[Memory Card], and then specify the directory.
3
Press [New].
A keyboard window appears. (See the section “Menu Operations” in
Chapter 2 (Volume 1).)
4
Enter a name of up to eight characters, and press [Enter].
The name entered appears in the status area as a frame memory folder.
Notes
• The following names cannot be used.
Default, Flash1, Flash2
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3,
COM4, COM5, COM6, COM7, COM8, COM9, LPT0, LPT1, LPT2,
LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9
• It is not possible to create 12 or more directories in the frame memory folder.
To rename a frame memory folder
1
Using any of the following methods, select the folder.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
To Next Page
Loading...
