Sony DVS-9000 System - Page 808

Appendix (Volume 2)
808
Functional Differences With Models of DME
a) Effect groups 1 and 2 cannot be selected at the same time. Pattern 304 (round corner) is not
supported.
b) When Shaped Video is off.
c) It is not possible to make settings for external input signals.
Setting AUX bus
output/re-entry
input
7337.7 It is not
possible to
make settings
for DME 1 to 8
Ext In.
When using
the DME
dedicated
interface, it is
not possible to
make settings
for DME 1 to 8
Video/Key.
It is not possible
to make settings
for DME 1 to 8
Video/Key.
“Setting the AUX
Bus Output and
Reentry Input” in
Chapter 18
(Volume 3)
TBC window
center position
7341.1 Yes only when
SDI interface
is used.
c)
Yes only when
SDI interface is
used.
No “Setting the TBC
Window Center
Position” in
Chapter 21
(Volume 3)
Adjustment of
monitor output
video clip level
7343 Yes only when
SDI interface
is used.
Yes only when
SDI interface is
used.
No “Adjusting the
Monitor Output” in
Chapter 21
(Volume 3)
Monitor output
signal settings
7343.1 Yes only when
SDI interface
is used.
Yes No “Setting the
Monitor Output” in
Chapter 21
(Volume 3)
Function Menu
number
MVE-8000A MVE-9000 BKDS-9470 See