83Basic Menu Operations
Chapter 2 Menus and Control Panel
a) When the three-dimensional transformation operation mode is enabled.
b) When the [MENU] button is Off.
c) When the [MENU] button is On.
a) When the [TIMELINE] button is Off.
b) When the [TIMELINE] button is On.
Auxiliary bus control block
Buttons Menus See
FMS1, FMS2 Frame Memory >Still >Freeze/Store page 278
FM1 to 8 signals assigned
buttons
Frame Memory >Still >Recall page 281
Color Bkgd1 signal assigned
button
Color Bkgd >Color Bkgd1 page 314
Color Bkgd2 signal assigned
button
Color Bkgd >Color Bkgd2
CCR1 signal assigned button CCR >CCR1 >XX page 337
CCR2 signal assigned button CCR >CCR2 >XX
Device control block (trackball)
Buttons Menus See
DME1 to DME4
a)
DME >XX Chapter 11
(Volume 2)
DEV1 to DEV12 assigned
buttons
• Device >DDR/VTR >Cueup & Play
b)
• Device >DDR/VTR >Timeline
c)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall page 295
Device control block (search dial)
Buttons Menus See
DEV1 to DEV12
• Device >DDR/VTR >Cueup & Play
a)
• Device >DDR/VTR >Timeline
b)
Chapter 12
(Volume 2)
FM1CLIP to FM8CLIP
assigned buttons
Frame Memory >Clip >Recall page 295