Chapter 19 Control Panel Setup (Panel)
892
Overall Control Panel Settings (Config Menu)
The Menu Panel menu appears.
The left side of the status area shows the Top menu selection buttons and
user preference buttons, and the right side shows a list of menus and
actions to be assigned.
3
Using any of the following methods, scroll the display.
• Press the arrow keys.
• Turn the knob.
4
In the button indications on the left, press the button for the assignment.
5
Using any of the following methods, select the menu or action to be
assigned.
• Press directly on the right list.
• Press the arrow keys on the right list to scroll the reverse video cursor.
• Turn the knob.
6
Press [Set].
This assigns the menu or action selected in the list to the button.
To cancel an assignment, select the button, then press [Clear].
To return all button assignments to the factory default state, in the Menu
Panel menu, press [Default].
Knob Parameter Adjustment Setting values
1 Scroll Scroll 1 to 5
Knob Parameter Adjustment Setting values
3 Menu/Action Select the menu or action 1 to 40
To Next Page