ST STM32F2 User Manual

HAL CAN Generic Driver
UM1940
114/1371
DocID028236 Rev 2
Return values
HAL: state
8.3 CAN Firmware driver defines
8.3.1 CAN
CAN Error Code
HAL_CAN_ERROR_NONE
No error
HAL_CAN_ERROR_EWG
EWG error
HAL_CAN_ERROR_EPV
EPV error
HAL_CAN_ERROR_BOF
BOF error
HAL_CAN_ERROR_STF
Stuff error
HAL_CAN_ERROR_FOR
Form error
HAL_CAN_ERROR_ACK
Acknowledgment error
HAL_CAN_ERROR_BR
Bit recessive
HAL_CAN_ERROR_BD
LEC dominant
HAL_CAN_ERROR_CRC
LEC transfer error
CAN Exported Macros
__HAL_CAN_RESET_HANDLE_STATE
Description:
Reset CAN handle state.
Parameters:
__HANDLE__: specifies the CAN Handle.
Return value:
None
__HAL_CAN_ENABLE_IT
Description:
Enable the specified CAN interrupts.
Parameters:
__HANDLE__: CAN handle
__INTERRUPT__: CAN Interrupt
Return value:
None
__HAL_CAN_DISABLE_IT
Description:
Disable the specified CAN interrupts.
Parameters:
__HANDLE__: CAN handle
__INTERRUPT__: CAN Interrupt
Return value:
None

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English