ST STM32F2 User Manual

LL ADC Generic Driver
UM1940
716/1371
DocID028236 Rev 2
LL_ADC_REG_GetFlagEndOfConversion
Function name
__STATIC_INLINE uint32_t
LL_ADC_REG_GetFlagEndOfConversion (ADC_TypeDef *
ADCx)
Function description
Get which ADC flag between EOC (end of unitary conversion) or
EOS (end of sequence conversions) is used to indicate the end of
conversion.
Parameters
ADCx: ADC instance
Return values
Returned: value can be one of the following values:
LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV
LL_ADC_REG_FLAG_EOC_UNITARY_CONV
Reference Manual to
LL API cross
reference:
CR2 EOCS LL_ADC_REG_GetFlagEndOfConversion
LL_ADC_INJ_SetTriggerSource
Function name
__STATIC_INLINE void LL_ADC_INJ_SetTriggerSource
(ADC_TypeDef * ADCx, uint32_t TriggerSource)
Function description
Set ADC group injected conversion trigger source: internal (SW
start) or from external IP (timer event, external interrupt line).
Parameters
ADCx: ADC instance
TriggerSource: This parameter can be one of the following
values:
LL_ADC_INJ_TRIG_SOFTWARE
LL_ADC_INJ_TRIG_EXT_TIM1_CH4
LL_ADC_INJ_TRIG_EXT_TIM1_TRGO
LL_ADC_INJ_TRIG_EXT_TIM2_CH1
LL_ADC_INJ_TRIG_EXT_TIM2_TRGO
LL_ADC_INJ_TRIG_EXT_TIM3_CH2
LL_ADC_INJ_TRIG_EXT_TIM3_CH4
LL_ADC_INJ_TRIG_EXT_TIM4_CH1
LL_ADC_INJ_TRIG_EXT_TIM4_CH2
LL_ADC_INJ_TRIG_EXT_TIM4_CH3
LL_ADC_INJ_TRIG_EXT_TIM4_TRGO
LL_ADC_INJ_TRIG_EXT_TIM5_CH4
LL_ADC_INJ_TRIG_EXT_TIM5_TRGO
LL_ADC_INJ_TRIG_EXT_TIM8_CH2
LL_ADC_INJ_TRIG_EXT_TIM8_CH3
LL_ADC_INJ_TRIG_EXT_TIM8_CH4
LL_ADC_INJ_TRIG_EXT_EXTI_LINE15
Return values
None:
Notes
On this STM32 serie, setting of external trigger edge is
performed using function
LL_ADC_INJ_StartConversionExtTrig().
Availability of parameters of trigger sources from timer
depends on timers availability on the selected device.
Reference Manual to
CR2 JEXTSEL LL_ADC_INJ_SetTriggerSource

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English