ST STM32F2 User Manual

UM1940
HAL ADC Extension Driver
DocID028236 Rev 2
103/1371
Function description
Configures the ADC multi-mode.
Parameters
hadc: : pointer to a ADC_HandleTypeDef structure that
contains the configuration information for the specified ADC.
multimode: : pointer to an ADC_MultiModeTypeDef
structure that contains the configuration information for
multimode.
Return values
HAL: status
7.3 ADCEx Firmware driver defines
7.3.1 ADCEx
ADC Specific Channels
ADC_CHANNEL_TEMPSENSOR
ADC Common Mode
ADC_MODE_INDEPENDENT
ADC_DUALMODE_REGSIMULT_INJECSIMULT
ADC_DUALMODE_REGSIMULT_ALTERTRIG
ADC_DUALMODE_INJECSIMULT
ADC_DUALMODE_REGSIMULT
ADC_DUALMODE_INTERL
ADC_DUALMODE_ALTERTRIG
ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT
ADC_TRIPLEMODE_REGSIMULT_AlterTrig
ADC_TRIPLEMODE_INJECSIMULT
ADC_TRIPLEMODE_REGSIMULT
ADC_TRIPLEMODE_INTERL
ADC_TRIPLEMODE_ALTERTRIG
ADC Direct Memory Access Mode For Multi Mode
ADC_DMAACCESSMODE_DISABLED
DMA mode disabled
ADC_DMAACCESSMODE_1
DMA mode 1 enabled (2 / 3 half-words one by
one - 1 then 2 then 3)
ADC_DMAACCESSMODE_2
DMA mode 2 enabled (2 / 3 half-words by pairs -
2&1 then 1&3 then 3&2)
ADC_DMAACCESSMODE_3
DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1
then 1&3 then 3&2)
ADC External Trigger Edge Injected
ADC_EXTERNALTRIGINJECCONVEDGE_NONE
ADC_EXTERNALTRIGINJECCONVEDGE_RISING
ADC_EXTERNALTRIGINJECCONVEDGE_FALLING

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English