EasyManua.ls Logo

ST STM32F2

ST STM32F2
1371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HAL CRYP Generic Driver
UM1940
148/1371
DocID028236 Rev 2
Parameters
hcryp: pointer to a CRYP_HandleTypeDef structure that
contains the configuration information for CRYP module
pCypherData: Pointer to the cyphertext buffer
Size: Length of the plaintext buffer, must be a multiple of 8
pPlainData: Pointer to the plaintext buffer
Timeout: Specify Timeout value
Return values
HAL: status
HAL_CRYP_DESECB_Encrypt_IT
Function name
HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT
(CRYP_HandleTypeDef * hcryp, uint8_t * pPlainData, uint16_t
Size, uint8_t * pCypherData)
Function description
Initializes the CRYP peripheral in DES ECB encryption mode
using IT.
Parameters
hcryp: pointer to a CRYP_HandleTypeDef structure that
contains the configuration information for CRYP module
pPlainData: Pointer to the plaintext buffer
Size: Length of the plaintext buffer, must be a multiple of 8
pCypherData: Pointer to the cyphertext buffer
Return values
HAL: status
HAL_CRYP_DESECB_Decrypt_IT
Function name
HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT
(CRYP_HandleTypeDef * hcryp, uint8_t * pCypherData,
uint16_t Size, uint8_t * pPlainData)
Function description
Initializes the CRYP peripheral in DES ECB decryption mode
using IT.
Parameters
hcryp: pointer to a CRYP_HandleTypeDef structure that
contains the configuration information for CRYP module
pPlainData: Pointer to the plaintext buffer
Size: Length of the plaintext buffer, must be a multiple of 8
pCypherData: Pointer to the cyphertext buffer
Return values
HAL: status
HAL_CRYP_DESCBC_Encrypt_IT
Function name
HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT
(CRYP_HandleTypeDef * hcryp, uint8_t * pPlainData, uint16_t
Size, uint8_t * pCypherData)
Function description
Initializes the CRYP peripheral in DES CBC encryption mode
using interrupt.
Parameters
hcryp: pointer to a CRYP_HandleTypeDef structure that
contains the configuration information for CRYP module
pPlainData: Pointer to the plaintext buffer
Size: Length of the plaintext buffer, must be a multiple of 8
pCypherData: Pointer to the cyphertext buffer

Table of Contents

Related product manuals