ST STM32F2 - MMC Memory Cards; MMC Exported Macros

HAL MMC Generic Driver
UM1940
364/1371
DocID028236 Rev 2
MMC_DUAL_VOLTAGE_RANGE
VALUE OF ARGUMENT
eMMC_HIGH_VOLTAGE_RANGE
for eMMC> 2Gb sector mode
eMMC_DUAL_VOLTAGE_RANGE
for eMMC> 2Gb sector mode
MMC_INVALID_VOLTAGE_RANGE
MMC Memory Cards
MMC_HIGH_VOLTAGE_CARD
MMC_DUAL_VOLTAGE_CARD
Exported Constants
BLOCKSIZE
Block size is 512 bytes
CAPACITY
Log Block Nuumber for 2 G bytes Cards
MMC Exported Macros
__HAL_MMC_ENABLE
Description:
Enable the MMC device.
Return value:
None
__HAL_MMC_DISABLE
Description:
Disable the MMC device.
Return value:
None
__HAL_MMC_DMA_ENABLE
Description:
Enable the SDMMC DMA transfer.
Return value:
None
__HAL_MMC_DMA_DISABLE
Description:
Disable the SDMMC DMA transfer.
Return value:
None
__HAL_MMC_ENABLE_IT
Description:
Enable the MMC device interrupt.
Parameters:
__HANDLE__: MMC Handle
__INTERRUPT__: specifies the SDMMC interrupt
sources to be enabled. This parameter can be one or
a combination of the following values:
SDIO_IT_CCRCFAIL: Command response
received (CRC check failed) interrupt
SDIO_IT_DCRCFAIL: Data block sent/received
(CRC check failed) interrupt
SDIO_IT_CTIMEOUT: Command response